Knowledge Center

Matting Cleaning Methods

Easy to Clean!

Cleaning the mats is the responsibility of the end user. Warranty will be voided on mats that are not appropriately maintained. If you have any additional questions, please contact your ERGOMAT distributor or Contact Us.

Ergomat Usage & Cleaning: Download SPEC

Please reference the tables below to learn more about cleaning your Ergomat Matting.

Classic, Complete Bubble/Smooth/ESD, Basic Bubble/Smooth, Bubble Down
Suitable for usage: Dry Areas
Temperature: 40° to 95° F / 5° to 35° C
Cleaning Instructions: Sweeping
Vacuuming
Washing in mild soap (pH:6-8) with subsequently careful wiping so all water is removed
Washing in mild soap (pH:6-8) with subsequently careful wiping so all water is removed
Infinity Deluxe, Infinity Bubble,
Infinity Smooth
Suitable for usage: Dry Areas
Temperature: 40° to 95° F / 5° to 35° C
Cleaning Instructions: Sweeping
Vacuuming
Washing in mild soap (pH: 2-9.5)


If the backside of the mat gets wet during the washing, the mat must lie upside down until it is dry and all the moisture has evaporated
Softline, Nitro, Nitril, Nitril ESD/F/Smooth/Smooth ESD, Industry
Suitable for usage: Dry and Wet Areas
Temperature: (-) 40° to 195° F / (-) 40° to 90° C
Cleaning Instructions: Sweeping
Vacuuming
Wet mopping with mild soap (pH 5-9)
Pressure Washing: 1,000-1,500 PSI (70-100 BAR) at a minimum distance of 8"
Pressure Washing: 1,000-1,500 PSI (70-100 BAR) at a minimum distance of 8"
Autoclavable in 2' x 3' (60cm x 90cm) size only. Dry the mat horizontally and flat. Avoid bending. The virgin Nitril or EPDM rubber can withstand numerous cycles of autoclave heat, but over time the bonding agent used to build out larger mats will weaken the seams in the mat, and can cause them to come apart.
Hygiene, Super Safe Smooth,
Super-Safe Ergo
Suitable for usage: Dry and Wet Areas
Temperature: (-) 40° to 195° F / (-) 40° to 90° C
Cleaning Instructions: Sweeping
Vacuuming
Wet mopping with water based cleaning agent (pH: 1-13)
Pressure Washing: 1,000-1,500 PSI (70-100 BAR) at a minimum distance of 8"
Pressure Washing: 1,000-1,500 PSI (70-100 BAR) at a minimum distance of 8"
Autoclavable in 2' x 3' (60cm x 90cm) size only. Dry the mat horizontally and flat. Avoid bending. The virgin Nitril or EPDM rubber can withstand numerous cycles of autoclave heat, but over time the bonding agent used to build out larger mats will weaken the seams in the mat, and can cause them to come apart.